Clemex Image Analysis Solutions 

Clemex have developed a series of Image Analysis procedures that show you what is possible with Clemex Vision software solutions.

These procedures show the report of the analysis but the routines are available to work with a Clemex system

1. Grain Size Analysis in Steel

2. Grain Size Analysis in Copper

3. Grain Size characterisation of Titanium

4. Martensitic Grain Size Analysis

5. Grain Size in Stainless Steel

6. Grain Size Analysis in Aluminium Alloys

7. Dendritic Arm Spacing in Aluminium Alloy

8. Carbide Analysis in Nickel based Alloy

9. Porosity Analysis in Aluminium

10. Porosity Analysis in Cast Iron

11. Depth of carburisation in Steel as per ASTM E1099

12. Phase Area Percentage Analysis

13. ASTM E1268 Banding Analysis

14. Cell Sizing in Extruded Foam

15. Dendritic Arm Spacing in Copper Lead Alloy

16. Characterisation of a Thermal Spray Coating

17. Characterisation of WC-Co Alloys

18. Coating Characterisation

19. Coating Characterisation of Silicon Carbides

20. Nodularity and Ferrite/Pearilte Analysis

21. Welding Analysis

22. Hardness & Porosity Volume in Sintered Component

23. Hardness & Nodularity Assessment of Casting

24. Hardness & Delta Ferrite Percentage

25. Brinell Hardness

26. MicroHardness Knoop

27. Cleanliness Evaluation according to ISO 16232 standard

28. Particle Analysis according to ISO 4406 & 4407 standards

29. Inclusion Analysis ASTM E45

30. Angularity Analysis

31. Pollen Density Analysis

32. Pharmaceutical particles in oil

33. Sphere Characterisation

34. Morphology Characterisation of Cotton Fibres

35. Flake Size as per ASTM A247 & ISO 945

36. Powder Particle Analysis

37. Cleanliness Evaluation as per IEST-STD-CC1246D

38. Eye Drop Particle Size and Evaluation

39. Grey Cast Iron Measurements as per ASTM A247

40. Sand Particle Characterisation